Begin typing your search above and press return to search. Press Esc to cancel.

Discounted Training


If you are not a Cribhut Premium member and would like to enrol in a course – click here

Emergency First Aid – Cardiopulmonary Resuscitation (CPR) Course

Cardiopulmonary Resuscitation (CPR) CourseThis course covers the skills and knowledge required to provide Cardiopulmonary Resuscitation (CPR). This unit of competence can be completed on its own or is the annual CPR refresher required to maintain the currency of your First Aid Certificate.
Full Details

 


Workplace First Aid Course – Level 1 (Provide Basic Emergency Life Support)

First Aid CourseThis Nationally Accredited Certificate provides participants with the knowledge, skills and confidence to provide initial emergency care in accordance with approved First Aid principles.  This course will also allow you to provide basic First Aid response in emergency life support until emergency assistance arrives.

Full Details

 


Dogging Course (DG)

Dogging CourseDogging covers the application of slinging techniques including the selection and inspection of lifting gear, and also covers the directing of crane or hoist operators in the movement of loads, including when loads are out of sight of the Crane Driver.
Full Details

 


Dogging Course (DG) Refresher (Verification Of Competency)

Dogging Course

A Verification of Competency (V.O.C.) is a method of assessment that can be used to demonstrate the worker’s ability to undertake the responsibilities of the Dogging job role, and upgrade knowledge to the current industry standard, including the application of slinging techniques, selection and inspection of lifting gear, and more.
Full Details

 


Rigging Licence Courses – Basic (RB)

Rigging Courses

Basic Rigging specifies the outcomes required to perform basic rigging work associated with movement of plant and equipment, steel erection, hoists (including mast climbing hoists), placement of pre-cast concrete, safety nets and static lines, perimeter safety screens and shutters; and cantilever crane loading platforms for licensing purposes. Applicants must be at least 18 years old.

Full Details

 


Rigging Licence Courses – Intermediate (RI)

Rigging Courses

Intermediate Rigging specifies the outcomes required to perform rigging work at the intermediate level, which includes all the outcomes for rigging work at the basic level, and may also include rigging of cranes, conveyors, rigging associated with tilt slabs, rigging associated with demolition work, and dual lifts for licensing purposes.  Applicants must be at least 18 years old.

Full Details

 


Rigging Licence Course – Advanced (RA)

Rigging Courses

Advanced rigging is the use of mechanical loadshifting equipment and associated gear to move, place or secure a load including plant equipment or members of a building or structure and includes rigging of gin poles, flying foxes and cable ways, guyed derricks and structures, and suspended scaffolds and fabricated hung scaffolds. Applicants must be at least 18 years old.

Full Details

 


Rigging Refresher Course (Verification Of Competency)

Rigging Courses

A Verification of Competency (V.O.C.) is a method of assessment that can be used to demonstrate the worker’s ability to operate equipment and/or undertake the responsibilities of the Rigging job role, and upgrade knowledge to the current industry standard, including planning and the selection and inspection of equipment.
Full Details

 


Scaffolding Licence Course – Basic (SB)

Scaffold CoursesBasic Scaffolding covers the scope of work to plan the job, select and inspect equipment, set up task, erect and dismantle modular scaffold and scaffold equipment.  Participants must be over 18 years of age.

 

Full Details

 


Scaffolding Licence Course – Intermediate (SI)

Scaffold Courses

Intermediate Scaffolding training covers the scope of work to plan the job, select and inspect equipment, set up task, erect scaffold and scaffold equipment and dismantle scaffold and scaffolding equipment. Participants must be over 18 years of age.
Full Details

 


Scaffolding Licence Course – Advanced (SA)

Scaffold Courses

Advanced Scaffolding covers the scope of work required to erect, alter and dismantle scaffolding at the Advanced level. Scaffolding consists of all intermediate scaffolding work including all other scaffolding work connected with the use and operation of Hung scaffolds and Suspended scaffolds for licensing purposes.  Participants must be over 18 years of age.

Full Details

 


Scaffolding Refresher Course (Verification Of Competency)

Scaffold Courses

A Verification of Competency (V.O.C.) is a method of assessment that can be used to demonstrate the worker’s ability to operate equipment and/or undertake the responsibilities of the Scaffolding job role, and upgrade knowledge to the current industry standard, including job planning and the selection and inspection of equipment.
Full Details

 


Elevated Work Platform Licence Course (EWP Ticket)

Elevated Work Platform Course (EWP Ticket)This course covers the correct use and handling of Boom Type Elevating Work Platforms (EWP) Information about Scissor Lifts and other types of platforms is included. Also known as Boom Lift 11m. Participants must be over 18 years of age.  Training is aligned to the national standards to ensure that the operator attains the skills required to operate in a High Risk Work environment.
Full Details

 


Elevated Work Platform Licence Refresher Course (Verification Of Competency)

Elevated Work Platform Course (EWP Ticket)A Verification of Competency (V.O.C.) is a method of assessment that can be used to demonstrate the worker’s ability to undertake the responsibilities of the Elevating Work Platform/Boom Lift role, and upgrade knowledge to the current industry standard, including pre-operation and safety checks, job planning, set up/operation/shut down of the EWP.
Full Details

 


Working At Heights Course

Working at Heights CourseThe nationally recognised Working at Heights course (also called Work Safely At Heights) has been created to prepare participants for all safety and practical aspects of working at height.

 

 

Full Details

 


Working At Heights Refresher Course

Working at Heights Course

The Working at Heights Refresher course has been created to re-confirm a participant’s knowledge of all safety and practical aspects of Working at Height.  This particular course is aimed at those who already have a Working at Heights qualification and need to refresh their theoretical knowledge. There is no practical training component required.

 

Full Details

 


Safe Working in Confined Space Course

Confined Space CourseThe Safe Working in Confined Space course provides all information necessary to satisfy the training requirements listed under Australian Standard 2865, the Codes of Practice for Confined Spaces, and the various Regulations of the States. It also meets the Competency units laid down in national Training Packages.

 

Full Details

 


Safe Working in Confined Space Course Refresher

Confined Space CourseThe Safe Working in Confined Space course provides all information necessary to satisfy the training requirements listed under Australian Standard 2865, the Codes of Practice for Confined Spaces, and the various Regulations of the States. It also meets the Competency units laid down in national Training Packages.

 

Full Details

 


UEE40411 Certificate IV in Electrical Instrumentation Course

This course is aimed at candidates who would like to gain exposure in / enhance their PLC, HMI and process instrumentation skills giving them the edge to enter the Oil & Gas Industry or any industry of preference – PLC interfaces with field instrumentation.

Full Details

UEE31211 Certificate III in Instrumentation and Control Course

The Certificate III course is aimed at those who would like to enhance their PLC, HMI and Process Instrumentation skills giving them the edge to enter the Oil & Gas Industry or any industry of preference – PLC interfaces with field instrumentation. The candidate will need to complete a log sheet documenting hours of work experience in the instrumentation field to attain this full qualification.

Full Details

UEE42611 Certificate IV in Hazardous Areas – Electrical Course

Certificate IV in Hazardous areas - Electrical Course

The Certificate IV course is for Electrical workers, Electricians who are seeking opportunity to work in oil and gas and chemical process industry (Hazardous Areas).

 

Full Details

EEHA Installation, Maintenance and Inspection Course

EEHA Installation, Maintenance and Inspection Course

This 5-day course and is intended for Electrical workers and Electrical Engineers. This course covers the practical aspects of the course content with emphasis on inspection and testing.

 

Full Details

EEHA Refresher Training Course

EEHA Refresher Course

The EEHA Refresher Course is run over two days and is a recommended refresher course aimed at keeping students current. It’s aimed at students who hold the competencies delivered in EEHA.

 

Full Details

EEHA Awareness Training Course

EEHA Awareness Training Course

The EEHA Awareness training is a one day course. It is recommended for engineers and salesperson’s and the likes, who need knowledge on different explosion protection techniques of Ex-certified equipment. This will help candidates to select suitable equipment in different hazardous area zones.

Full Details

 

We are able to offer you the above courses thanks to our mates at Your Licence and Tech Skills Australia.

Cribut has a partnership for nationally accredited training with Your Licence Pty Ltd and Tech Skills Australia.  This provides us with a means to direct you to enrol in blue collar courses around Australia with team’s that we trust.

We choose to partner with Your Licence and Tech Skills Australia as the Directors themselves have industry experience and are down to earth, good honest people. Your Licence and Tech Skills Australia have also kindly provided Cribhut Premium Members with a 10% discount on all courses when you enrol through a form via this page.